Sanei marine elevator is applied into the tour boats in the river, cargo ships, ocean liners, container ships, oilers, big-size buildings, oil drilling platforms, maritime surveillance ships, warships and scientific investigation ships. Use the relevant elevator standards of the Classification Society, and pass the test of the Classification Society. The elevator types include marine passenger elevator, marine freight elevator, marine elevator and ocean passenger elevator etc.
Marine Elevator
Marine Elevator
Introduction
Unique signal acquisition
By using the unique double line carrier transmission mode, the command signal of the car is connected with the control of the system reliably, which avoids the disadvantages of the multi angle angle transmission which is usually used in the oblique elevator. The signal transmission is reliable, the failure rate is low, the maintenance is free, and the well path signal adopts the bus four wire serial transmission mode.
Intelligent door machine
Keep track of the running track of the intelligent elevator door machine, thereby changing the relative position of the elevator door knife, ensure the reliable connection and the stop door knife gate ball layer.
Car signal control
The battery powered by DC high performance maintenance, control integration door machine, and the barge stop seat type automatic charging way to supplement the energy of the battery, the whole car, only two safety loop connection cable and control system (with standard regulations), car lighting and ventilation are use the battery power supply, emergency call also uses audio carrier technology to achieve.
Parameter Table
| Rated load | Drag method | Rated speed | Net dimension of car | Dimension of door opening | Dimension of hoistway | Dimension of machine room | Over head | Pit depth | |||||
| Width | Depth | Width | Height | Width | Depth | Width | Depth | Height | |||||
| kg | m/s | A | B | E | F | C | D | R | T | H | Q | P | |
| Rated load | Drag method | Rated speed | Net dimension of car | Dimension of door opening | Dimension of hoistway | Dimension of machine room | Over head | Pit depth | |||||
| Width | Depth | Width | Height | Width | Depth | Width | Depth | Height | |||||
| kg |
V V V F |
m/s | A | B | E | F | C | D | R | T | H | Q | P |
| 1000 | 0.5/1.0 | 1500 | 1800 | 1300 | 2100 | 2400 | 2100 | 3500 | 3500 | 2600 | 4300 | 1400 | |
| 1600 | 0.5 | 2000 | 2000 | 1500 | 2200 | 2800 | 2350 | 3500 | 4000 | 2600 | 4400 | 1400 | |
| 2000 | 0.5 | 2000 | 2400 | 1600 | 2200 | 2950 | 2750 | 3500 | 4500 | 2600 | 4500 | 1400 | |
| 3000 | 0.5 | 2500 | 2600 | 2000 | 2200 | 3600 | 2950 | 4300 | 4700 | 2800 | 4500 | 1400 | |
| 5000 | 0.25/0.5 | 3000 | 3300 | 2600 | 2400 | 4450 | 3650 | 5500 | 5500 | 2800 | 4800 | 1500/1600 | |
Details PC version
Standard Function
| Standard Function | Function Description |
| >Brake detection and protection | Open and closed through real-time monitoring of the brake brake arm detection switch. When the brake is not required when opened. The system will not allow the elevator. |
| >The correction speed and the number of floors of station | The system in operation is detected in the end station after the switch. The elevator will force the speed and automatic correction of floor display. |
| >Limit protector | he system detects the limit switch action, will immediately stop the elevator running. |
| >Maximum protection | The system detects the limit switch action, the whole system will immediately power down. |
| >Overspeed protection | When the elevator up and down more than 1.2 times the rated speed, cut off the control power supply, the elevator will stop running. |
| >Layer station floor, direction display | The station shows the elevator floor and the direction to be run. |