The speed grades are adjustable, with more capacity span, and there are dozens of specifications, which is the result from the fact that SANEI freight elevator integrates various advanced manufacture technologies by meeting different customer requirements. More sophisticated technologies, more strong driving force, more space, better services and more options, which are the permanent steps for SANEI freight elevator!
Freight Elevator
Lifting The Weight
Introduction
SN-TO01
2P side opening
Landing door: Paint steel
Jamb: Paint steel
SN-TO02
4p center opening
Landing door: Paint steel
Jamb: Paint steel
Ordinary checkered steel
plate (standard)
Stainless steel checkered steel plate (optional)
Wooden
Black rubber
SN-COP01/ZOP01
Integrated intelligent control system
The computer intelligent control system, multi microcomputer, modularization, network control, improve the speed of data processing; high intelligent micro computer module inside the system, control and management of computer operation safe, accurate and efficient
Microcomputer group control management system
SANEI elevator group control system is a high-speed network with the central nervous system, it adopts fuzzy calculation method, efficient and fast algorithm based on gene, calculate the elevator operation mode of building a better choice, timely lift scheme for passengers.
Intelligent elevator system
Passengers only need to enter the elevator on the keyboard or touch screen to select the destination floor, the system will be suitable for the passengers of the elevator, direct to the designated floor.
A、The end of the traditional elevator layer by layer of the drawbacks of pause
B、Create a more orderly environment for the lobby
C、Effectively improve the elevator crowding phenomenon
New generation permanent magnet synchronous gearless traction machine
SANEI elevator is the pioneer of permanent magnet synchronous gearless traction technology. According to the concept of environmental protection research and development of the core technology, on behalf of the future direction of the elevator. Saving energy, saving space, reducing the cost of building construction and elevator operation cost is the core technology in the industry a major feature. And completely solve the problem of environmental pollution caused by the oil leakage of the traditional traction machine, to achieve the maintenance of the motor and environmental protection requirements
LED Energy-saving Lighting
DC drive LED lighting as the interior lighting, power consumption is very low, the electro-optical power conversion is close to 100%, in the same lighting effect, compared to the traditional light source can save more than 80%.
Automatic interior lighting
Use the car automatic lighting technology, give full consideration to the humanization and energy saving and environmental protection requirements, to ensure that when not in use in the lights out, no power consumption; some people use, automatically open, low power consumption, energy saving.
Precise position control system
The advanced sensor is used to carry on the high accuracy real-time signal feedback to the motor rotor's state of motion, and realizes the position of the car which runs on the well path to reach the millimeter level precision, and realizes the flat layer with almost no error. The reliability of the car displacement memory technology to ensure that the elevator stops in advance to open the door and the security layer function.
Door control system
SANEI elevator door control system uses a double control system, a set of control cabinet by the main controller control, the other group is controlled by the main board inside the car, greatly reducing the door control system failure because the elevator does not open the door phenomenon.
Parameter Table
Freight Elevator Construction
| Rated load(kg) | Persons | Net dimension of car（mm） | Dimension of door opening（mm） | Dimension of hoistway（mm） | Dimension of machine room（mm） | Over head（mm） | Pit depth（mm） | |||||
| Width | Depth | Width | Height | Width | Depth | Width | Depth | Height | ||||
| A | B | E | F | C | D | R | T | H | Q | P | ||
| 1000 | 0.5/1.0 | 1300 | 1800 | 1200 | 2100 | 2400 | 2100 | 2750 | 3740 | 2500 | 4300 | 1400 |
| 2000 | 0.5/1.0 | 2000 | 2400 | 1600 | 2200 | 2950 | 2760 | 3000 | 4400 | 2500 | 4500 | 1500 |
| 3000 | 0.5 | 2500 | 2600 | 2000 | 2200 | 3550 | 2960 | 3700 | 3640 | 3000 | 4500 | 1500 |
| 4000 | 0.5 | 2100 | 3600 | 2000 | 2400 | 3450 | 3900 | 3450 | 3900 | 3000 | 4800 | 1500 |
| 5000 | 0.5 | 3000 | 3300 | 2400 | 2400 | 3950 | 3900 | 3950 | 3900 | 3000 | 4800 | 1500 |
| 8000 | 0.5 | 3300 | 3640 | 3950 | 2950 | 5370 | 4500 | 5370 | 4700 | 3000 | 6000 | 1560 |
| 10000 | 0.5 | 3500 | 3940 | 3950 | 2950 | 5670 | 4800 | 5670 | 5000 | 3000 | 6000 | 1560 |
Details PC version
Well layout
Machine Roomless Freight Elevator Construction
| Rated load(kg) | Persons | Net dimension of car（mm） | Dimension of door opening（mm） | Dimension of hoistway（mm） | Dimension of machine room（mm） | Over head（mm） | Pit depth（mm） | |||||
| Width | Depth | Width | Height | Width | Depth | Width | Depth | Height | ||||
| OP | OF | HW | HD | A | B | H | OH | PP | ||||
| 2000 | 0.5 | Two panel side opening | 1500 | 2100 | 3000 | 2800 | 1800 | 2500 | 2200 | ≥4650 | ≥1600 | |
| 2000 | 1.0 | Two panel side opening | 1500 | 2100 | 3000 | 2800 | 1800 | 2500 | 2200 | ≥4650 | ≥1600 | |
| 3000 | 0.5 | Two panel center opening | 2000 | 2100 | 3600 | 3300 | 2100 | 3000 | 2200 | ≥4800 | ≥1600 | |
| 3000 | 1.0 | Two panel center opening | 2000 | 2100 | 3600 | 3300 | 2100 | 3000 | 2200 | ≥4800 | ≥1600 | |
Details PC version
Well layout
Standard Function
| Function | Description of functions |
| >Automatic operation | The lift automatically runs and stops, opens / shuts the door according to designated command. |
| >Operation by operator | The lift automatically runs and stops, manually shuts the door according to designated command. |
| >Overhaul operation | Under repair and inspection conditions, the lift runs at inspection speed through operating "slow up / slow down" buttons. |
| >Automatic door-shut time-delay |
After the car door has been opened completely, it keeps the door open condition. It automatically shuts the dnnr after time-delav. |
| >Call for opening of this floor | When the lift is shutting the door or it does not start but has closed the door, when there is any outer calling from this landing, it will reopen the door. |
| >Light curtain protection | When optical curtain has been shaded,it immediately stops door-shut action and automatically opens the door. |
| >Overload none door-shut | It does not shut the door in overload. And it is bright from overload lamp. The buzzer rings. It shows CZ or overload In the car and does not start the Ilft |
| >Full-load direct running | When it reaches the rated load, it only responds to internal selection instead of outer calling. |
| >Automatic lighting control | In the stipulated time, If the lift does not receive any travel command, the lighting will a utomatically die out. It automatically opens at command. |
| >Firefight return | When It starts home landing fire-fighting switch, all the commands will be cancelled then. The lift Immediately drives to the designated landing and park there. |
| >Mal-operation removal | Repeatedly operate internal selective button to cancel mal-operation registration |
| >Main contactor protection | After the lift executes door-shut command, if the door has not been closed within the stipulated time, it will re-open the door and then shut it again. |
| >Service floor setting | The lift only serves the set floor. |
| >Home landing floor setting | Under the automatic condition, if there is automatic ally run to the set landing. no command within certain period, the car will |
| >Landing floor, direction display in the car | It shows the landing floor of the lift, the direction where the lift is going to travel in the car, |
| >Direction chosen by driver | The running direction Is determined by the driver's directive. |
| >Trouble diagnosis | When there Is something wrong in the travel process, it will automatically diagnose the trouble cause, display in the operation panel and automatically store the latest trouble Information. |
| >Safety circuit protection | If safety circuit is disconnected, the lift will immediately stop the travel. |
| >Door Interlocking protection |
If It closes all of door Interlocking, it can then start the Ilft. If door Interlocking is disconn ected or trembled, the lift will stop the operation. |
| >Travel contactor protection |
The system can detect whether motor circuit contactor action is reliable or not. If any abnorma condition happens, it will stop the lift travel. |
| Function | Description of functions |
| >Brake test protection | It Implement real-time monitor to the brake open / shut through brake arm test switch. If the brake has been opened improperly, the system will not allow the lift to start. |
| >Terminal speed change and landing floor number correction | After the system detect terminal switch in travel, the lift will be forced to change the speed and automatically correct the landing floor display. |
| >Position-Limit protection | If the system detects limit switch action, It will immediately stop the lift travel. |
| >Limit protectior | If the system detects limit switch action, the whole system will Immediately lose power |
| >Over-speed protection | When the lift up / down exceeds 1.2 times of the rated speed, it will cut off control mains and stop the lift travel. |
| >Landing floor, direction display | The floor landing shows the landing floor that the lift travels and where it travels also. |
Optional Function
| Function | Description of functions |
| >Opposite door service setting | Correctly open / shut the door in the corresponding floor according to service setting. |
| >Fire-fighting running | After fire switch is closed, the system enters into fire-fighting running. |
| >Parallel connection control | Two-lift parallel connection control automatically responds the command according to rapid energy-saving principle so as to Increase the lift travel efficiency. |
| >Group supervision | The system can simultaneously control the travel of eight-lift. The function is the same as that of paralle connection control. |
| >Anti-nuisance | When the lift travels to the furthest floor, it will remove all the internal selective register. If it has load testes it will have three light-load internal selections at most. |
| >Emergency automatic leveling travel |
After the electric net power failure, the lift emergency automatic-leveling control device supplies power to travel leveling so that the passengers can leave there safely. |
| >Hoist-way hall arrival gong | Under the condition of normal travel arrival, voice announcer is used to announce the related passengers' Information. |
| >Hoist-way hall arrival gong | The electric gong that is installed In the car announces the passenger lift arrival to vast passengers. |
| >Intellectual calling service | The electronic gong in the waiting zone announces the lift arrival to the waiting passengers. |
| >Intellectual calling service | The car command or hoist-way hall calling can be locked or connected through the special Intellectual Input equipment |
| >Service to the handicapped | Man-machine interface specially serves the handicapped people. |
| >Electronic Punch Card System | The users shall swipe card In using the elevators. Those who do not have cards or have no jurisdiction can' t use the elevators. It enlarges the safety management of the house property personnel and effectively saves power loss In the buildings. |
| >Energy feedback device | It offers regenerated lift power to the buildings. It is effectively applicable for lighting In the buildings etc. so as to reduce the consumed power. |